Best Practices for Front Loading High Trail Bikes

  1. Load should be as far back as possible. Ideally behind the front hub, even an inch makes a big difference.
  2. Load should be as low as possible. My front rack is only about 20mm above the front tire and actually touches the front fender.
  3. Ride the bike. A lot of the “poor handling” mythos comes from lack of time on a bike. I’ve found that high trail front loads don’t handle poorly, they just handle different. The more you ride, the more natural it seems and the better the bike feels.

I’m not currently set up for or interested in front panniers but I think I’ll try them out once it gets warmer. May add another wrinkle but we’ll see.

Most front racks are pushed too far forward by the fork crown support. I’ve been looking at rack and setups and it’s obvious that with most racks mounted as recommended there’s no way not to have your load in front of the hub.

Here’s a good set-up. Even though it’s low-trail (high fork rake) the rack is as far back as possible, it’s too high but there does not appear to be any adjust-ability as this is most likely a rack designed for 700c being used on a 650b bike.

2016-12-27_9-36-22

Here’s a poor set-up. Rack is too high and too far forward due to poor fork crown attachment design and overall poor rack choice.

2016-12-27_9-40-10

Here’s my bike, it’s nice and low and far back. I can get most of what I carry behind the hub so handling is close to neutral.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s